Startup XP Repair Steps

ASR Pro: The #1 software for fixing Windows errors

  • 1. Download and install ASR Pro
  • 2. Open the program and click "Scan"
  • 3. Click "Repair" to start the restoration process
  • Solve your computer issues now with this reliable download.

    Over the past week, some of our users have encountered an error launching XP Repair. This issue occurs due to a number of factors. We’ll look at them now. Boot from one standard Windows XP installation CD (not the network installation CD).On the first setup screen, press R to service Windows using the Recovery Console.Select the Windows installation you want to repair by typing it and pressing Enter.

    With Windows XP it is possible to restore our Windows Startup without completely reinstalling the site. To do this, you must use the Recovery Console available from the corresponding installation CD.

    1. Last Known Good Configuration
    2. Recovery Access Console
    3. Rewrite the MBR.
    4. Startup Repair
    5. Repair NTLDR
    6. Restore the Boot.ini file.
    7. Repair file systems

    1. Last Good Configuration

    If your Windows XP computer stops booting (or does not boot correctly), the Last Known Good Configuration option is very easy to use.
    To do this, when starting your computer, press the F8 key several times to open the extended menu of Windows XP alternatives.
    From this menu, select the “Last Known Good Configuration (Your Most Current Settings)” line using the arrows on your precious keyboard, then press Enter.

    How do I boot to startup repair?

    While holding down the Shift key at the Windows logon screen, press the power key at the same time.Hold down the Shift key and click Restart.After restarting your PC, a screen appears with several options.Click on “More Options” here.

    When Windows wants you to start a lesson.
    Just press Enter, as in most cases there is only one operating system installed on your primary computer.

    If this option works in your application, Windows XP will start if you have no problem.

    2. Go To The Recovery Console .

    Set up your awesome BIOS to boot your CD / DVD drive. If you are unsure how to do this, read the Changing BIOS Boot Order guide.

    How do I force Windows XP to boot?

    After creating this special Windows boot disk, insert it directly into the disk drive of the affected system and press [Ctrl] [Alt] [Del] to restart the computer. If you boot from the Windows startup disk, the computer workstation bypasses the active partition in combination with the startup files on the hard disk and tries to start Windows XP normally.

    If the BIOS is configured correctly and the “Windows XP” CD is on all CDs / DVDs, the “Setup is checking your computer’s hardware configuration” message should appear briefly.

    RAID or SCSI hard drives are rarely used by home users, but some do it for performance and / or security reasons. This, in the event that it is necessary to load a bus driver (English driver) for Windows XP, will certainly do the trick.

    The Recovery Console will open. If you have problems with the keyboard layout, press Press ENTER. For example, if your CD is in English, the keyboard layout is likely to be QWERTY. You will need to select your language by pressing the specific ENTER key.

    startup xp repair

    Pressing the ENTER button displays this screen. Use the arrow buttons to select your preferred language and scroll through your selection by pressing “ENTER” on each button.

    A list of found installation windows is displayed. Select the installation that everyone wants to repair, provide the appropriate number, and enter the security for the administrator account.
    Note. If the password is empty, just enter ENTER.

    Multiple Windows settings can be displayed in multiboot mode.
    If you want to create a multiboot, read our tutorial “Tuto MultiBoot for all (xp Seven with GAG) – on one hard drive”, otherwise “Tuto MultiBoot / (xp Seven with GAG) – on 2 hard drives”.

    3. Rewrite The MBR .

    ASR Pro: The #1 software for fixing Windows errors

    Is your computer running slowly? Do you keep getting the Blue Screen of Death? Is your anti-virus software not doing its job properly? Well, have no fear, because ASR Pro is here! This powerful piece of software will quickly and easily repair all sorts of common Windows errors, protect your files from being lost or corrupted, and optimize your PC for maximum performance. You'll never have to worry about your computer crashing again - with ASR Pro on board, you're guaranteed a smooth, problem-free computing experience. So don't wait any longer - download ASR Pro today!

  • 1. Download and install ASR Pro
  • 2. Open the program and click "Scan"
  • 3. Click "Repair" to start the restoration process

  • Warning. We do not recommend using this command term on a laptop, as it may block access to the RECOVERY section that you can use tocomputer recovery. The existing recovery partition allows you to restore a computer on which all programs are installed in the form of attachments, drivers …

    To repair the MBR, clearly enter the “fixmbr” command and display it by typing the letter “y”.

    4. Start The Help.

    To restart Windows XP, all you have to do is enter the “fixboot” descriptor and validate it with the letter “y”.

    5. NTLDR Recovery

    If someone receives the message “ntldr (NTLDR is missing). Press Ctrl + Alt + Delete to restart “to restart Windows XP, restore it by entering these 3 commands:
    – Fixboot c:
    – simulate d: i386 ntldr c:
    – copy d: i386 ntdetect.com c:
    – dirty (to shutdown and restart part of the computer)

    Note. “D” is the letter of your CD / DVD drive. In addition, “c” represents the letter of the partition (where Windows is installed) to which these files are to be copied.

    6. Restore The Boot.ini File

    If name = “boot-ini”> this “Invalid BOOT.INI” file appears on your computer during startup, just create it fornew.

    Run this in Win Recovery Console. XP, enter: bootcfg / rebuild
    So answer the riddle:

    • Add installation to startup list? (Yes / No / All): (uppercase letter y Y)
    • Enter Boot ID: Microsoft Windows XP Professional or Microsoft Windows XP.
    • Enter the boot parameters for the operating system: / fastdetect.

    7. Rebuild The File System .

    startup xp repair

    Enter the following command to repair the file system and try to update the bad sector: chkdsk / r

    Note. This process can take a long time. This may take several hours depending on the state of the template file on your hard drive.

    After restoring the history system, you may need to use the methods described above.

    How do I fix a corrupted Windows XP?

    Insert the Windows XP installation CD.Restart your computer and boot from the CD portion.Press any key to boot from CD.When the men are loadedIn Windows Settings, press R to access the Recovery Console.Enter the administrator password.

    Solve your computer issues now with this reliable download.