How To Fix Gigabyte Xpress BIOS Recovery Problems

ASR Pro: The #1 software for fixing Windows errors

  • 1. Download and install ASR Pro
  • 2. Open the program and click "Scan"
  • 3. Click "Repair" to start the restoration process
  • Solve your computer issues now with this reliable download.

    Hope this guide helps you if you have Gigabyte xpress Bios Rescue in your system. GIGABYTE Xpress BIOS Rescue ™ is a tool that experts say can automatically restore damaged BIOS (BIOS plural) to its original state. This works so that each time the system is booted, the ISO file or image file of each BIOS is completely independently saved to an additional file on the hard disk.

    Xpress Recovery2 has been designed to provide fast backup and maintenance of hard drive data. Xpress Recovery2 supports operating systems We are Microsoft such as Windows 7 / Vista / XP / 2K / NT / 98 / Me and DOS only, as well as file systems such as FAT16, FAT32 and NTFS, and are ready to back up data to them. PATA Hard Drives and SATA IDE Controllers. The last time you run Xpress Recovery2 from the CD, it will remain on your hard drive forever. If you want to run Xpress Recovery2 later, you can simply press F9 while the device is booting to open Xpress Recovery2 without a CD.Required configuration:

    1. Intel x86 platforms
    2. At least 64 MB of system memory.
    3. VESA Compatible VGA Cards

    How to use Xpress Recovery2First access by booting from CD-ROM, then access by pressing F9:Steps: After entering BIOS setup, navigate to advanced BIOS features and make sure you boot from CD. Save the settings and exit the BIOS setup program. Insert the supplied driver CD into your CD-ROM drive. After the computer restarts, the message “Boot to get from CD / DVD:” appears in the lower left corner of the screen. Press any key to access Recovery2.After completing the aboveThese steps to Xpress Recovery2 can be accessed simply by pressing the primary key during system boot.

    * NOTE.

    1. When using Xpress Recovery2 for the first time, the user needs to assign the BIOS boot option from “Bootable CD” and insert the drivers CD into the removed optical drive. After restarting the platform, the user will see the “Press any key to launch Xpress Recovery2” screen, where you can press any key to launch Xpress Recovery2.
    2. If the user is already familiar with the Xpress Recovery2 PC software and has already installed it on the PC, he can launch the Xpress Recovery2 application by dragging and dropping “F9” at boot time.
    3. If someone has already launched Xpress Recovery2 by booting from the CD, your family members can launch Xpress Recovery2 in the future by pressing the button.
    4. System memory capacity and hard disk read / write speed refer to the speed at which data is saved.
    5. It’s good that Xpress Recovery2 is backed up immediately after the installation of the operating system and all the necessaryDimmable drivers other than software.

    Xpress Recovery2 home screen

    1. RESTORE:Recover the data backed up on your hard drive. (This button will not appear if there is no workaround file.)
    2. FUSE:Back up your data from a blank hard drive.
    3. CLEAN:Delete the backup files you created earlier to free up space on your computer. (This button will not appear if there is no backup file.)
    4. START FIRST:Close the secondary home screen and restart the system.


    1. Not compatible with Xpress Recovery.
    2. To use Xpress Recovery2, you need to back up the main partition.
    3. Xpress Recovery2 saves the associated hard disk image file at the end, so the user needs to purchase enough space in advance for the unallocated hard disk partitions. (A minimum of 4 GB is often recommended, but the actual space depends a lot on the size of the data to be backed up.)
    4. Ability to back up installed hard drives as well as operating Windows systems, including DOS, in addition to Windows Vista / XP / 2K / NT / 98 / Me.
    5. USB hard drives are not supported.
    6. Does not support hard drives with RAID / AHCI code (class 0104/0106).
    7. Option to confirm recovery and only temporary physical disk.
      Determining the sequence of the disc is as follows:
      1. Essential PATA IDE Channel
      2. Additional PATA IDE Channel
      3. TV Channel SATA IDE 1
      4. 2 channels SATA IDE
      5. SATA-IDE-Sift 3
      6. 4 channels SATA IDE

    Precautionary measures:

    1. Generally, backing up data takes longer than restoring data.
    2. Xpress Recovery2 is GPL compliant.
    3. Some Nvidia chipset based motherboards require a BIOS update for Xpress Recovery2 in order to properly recognize RAID and SATA IDE modes. Check with your motherboard manufacturer.
    4. Xpress Recovery2 only supports nearly impossible PATA hard drives, not SATA hard drives on the following motherboards:
      GA-K8N Ultra-SLI
      GA-K8N Pro-SLI
      GA-K8N Ultra-9
      GA-K8NF-9 (PCB version 1.0)
      GA-K8NE (print versionth board 1.0)
      GA-8N-SLI Royal
      GA-8N-SLI pro

    How do I enable dual BIOS?

    When the computer boots up, click Uninstall to enter BIOS setup, then press F8 to enter Dual BIOS setup. There is no need to press F1 when starting the PC, which is described in every manual.

    Solve your computer issues now with this reliable download.